skip to Main Content

PHARMACEUTICAL

Because the Rich Group system is simple to install and requires little user intervention in operation, it combines low start-up costs with the significant benefits of predictive maintenance. Since it doesn’t require any sensor installation on the equipment itself, and it can be installed out of production areas, Rich Group MCM is a particularly good solution for inaccessible equipment in the oil and gas industry.

SERVICE DETAILS

Typical applications where you can monitor either electrical, mechanical and water pumping conditions:

Environment Control:

A very important factor in the production of pharmaceuticals is controlling environmental parameters such as temperature, humidity and air flow rate. Monitor the air handling units with Rich Group technology to ensure the levels of these parameters are controlled according to requirements. This include monitoring the supply and extraction fans with the motors that drive them.

Also, this monitoring technology allows to monitor any load increase due to leakage of hot water or steam used for heating, and/or leakage of chilled water used for cooling and air conditioning systems. Of course, monitoring gas boilers or gas turbines, boiler feed pumps, ID/FD fans and related support equipment used in those system is also possible and recommended.

Manufacturing Process:

Although sometimes ignored due to size and number in the production line, small pumps and motor-driven mixers and agitators from the batch reactors can result in a batch lost due to a failure that could be prevented. Rich Group simplifies the work of monitoring this machines without the need of introducing wiring and equipment or sensors in direct contact to the line.

Also, monitor any conveying systems to make sure the manufacturing process runs smoothly from one station to the other.

For the manufacturing process, there are more service equipment needed, such as water for injection systems and deionized water systems. Monitor feeding and supply pumps running within these systems with Rich Group monitoring units and remember you will be able to detect both mechanical and electrical problems, including misalignment, loose foundation and components, bearing faults, load fluctuations, among others.

OTHER APPLICATIONS

In the pharmaceutical production process there are other motor-driven machines that represent an important part of the process or serve an important part of the process and they can also be monitored with Rich Group technology. Monitor bottle washers, cappers and fillers, feeders, gear and gearboxes and any other motor-driven equipment you consider should be monitored at all times.

Back To Top